astir s.a. Hotel Furniture, Country Corner furniture
HOMEPAGE | COMPANY
Pinterest   Instagram   Facebook     OFFER FORM   
    ΕΛ | ENG
FLOORING WALL PANELING COLLECTIONS OUTDOOR FURNITURE DECORES
WALL PANELING
Cocomosaic™ tiles are made of coconut-shell chips. Our coconut chips are cut from natural coconut shells which are abundant and found in many parts of Indonesia.
Coconut chips are lightweight, durable, natural and beautifully decorative. They are easy to care, easy to design with and have exotic looks. Now by using cocomosaic tiles, we can have the style we need while being environmentally conscious and active in our choices.

Cocomosaic tiles come in two types.

Classic series
(420x420mm), pack of 6 tiles, coconut shells (coverage 1,054m2)
ENVI series
reclaimed wood in different finishes (400x400mm), pack of 6 tiles, coverage 0,96m2 recycled timber (teak + other hardwoods).
PROJECTS
Installation Guide
COCOMOSAIC tiles can be applied easily. You do not need to be an expert to install Cocomosaic tiles although we do recommended that only skilled renovators or qualified tilers be used for a professional looking finish.
COCOMOSAIC tiles are natural and suitable for use in indoor environments. They can be applied to masses of walls, ceilings and even light traffic floors.

INSTALLATION GUIDE:
1. Open the packages 24 hours before installation to let the tiles adapt to the installation environment temperature. Prepare the tools and equipment. Any general-purpose silicon adhesive can be used. Follow the instructions displayed on the adhesive being used.

2. Clean the walls and ceilings that you want the panels to be applied to and ensure that the surfaces are solid and structurally sound. Surfaces should also be free from dust and oil

3. Apply the adhesive on the back surface of the tile forming 8 x 8 even grids. Ensure that the adhesive will reach the edges and corners sufficiently without squeezing out when pressure is applied. (For timber tiles, ensure each individual mosaic has sufficient adhesive applied to it so you do not have any loose mosaic peices after the tiles have been installed)

4. Paste tiles onto the wall starting at the bottom of the wall until the adhesive takes hold making sure the tile back is flat against the wall. Make sure the next tile is well aligned with the previous one completing an entire row before moving up to the next row. Butt the tiles up against each other, leaving a minimum of a 7mm gap where the tiles meet any joining walls and around window and door frames.)

When done, use gap filler to fill any gaps in the joins and also around the edges where they meet the walls, floor and ceiling and around window and door frames). Remove unnecessary overflow with a damp cloth.
Note: Cocomosaic tiles are 100% natural, and all processes are handmade. No two tiles are identical. The variation from tile to tile should not be considered a defect, rather it represents the true nature of the uniqueness of this wonderful product.

CUTTING COCOMOSAIC TILES
Cocomosaic tiles are easy to cut. We recommend that Cocomosaic Coconut and Timber tiles be cut to required size with a Timber Table top saw, compound mitre saw or even a jig saw for any shapes that are required to be cut. Cutting of tiles should only be performed by qualified operators of the tools being used ensuring that all safety procedure are being followed in accordance with the instruction manuals of those particular tools.

MAINTENANCE CLEANING
Cocomosaic panels are easy to maintain. Clean regularly with a vacuum cleaner and a clean damp cloth. A PH neutral detergent diluted with water can be used for any stubborn marks.

STORAGE
Tiles should be stored in a horizontal position, stacked to a maximum of ten boxes and must be stored in dry environments with good ventilation, and preferably on a pallet.

by: graphics.gr graphics.gr